ProofreaderPro.ai
Academic Writing Guides

Elsevier Highlights: Word Limits, Format and Examples

Elsevier highlights are three to five bullets of 85 characters or fewer, spaces included. The rules, file format, LaTeX code and examples by field.

Dana - Author at ProofreaderPro.aiDana|Nov 18, 2026|11 min read
elsevier highlights - ProofreaderPro Blog

Elsevier highlights are three to five bullet points that state the main findings of your article. Each bullet can be 85 characters or fewer, including spaces. Cell Press articles take three or four bullets. Elsevier asks for the new results of your study and any new methods, written in terms readers search for, with no jargon, acronyms or abbreviations. You upload them as a separate Word document, and Elsevier doesn't need them until the final files stage.

There is no word limit, only the character limit, which works out at about 10 to 15 words per bullet. The elsarticle LaTeX class has its own highlights block, and the text in it follows the same rules. Your journal's Guide for Authors can add its own rules, so read it alongside this guide.

What are Elsevier highlights?

Highlights are a short list of findings that goes with a journal article. Elsevier describes them as bullet points that capture the novel results of the research and any new methods used in the study. It asks for them because, in its words, they help search engines pick up your article and match it to the right audience.

Elsevier also tells authors to write them for the reader, because highlights are the first thing readers see. A reader can scan four short lines and decide whether the paper is relevant before reading the abstract.

An Elsevier journal may ask for highlights, an abstract and a graphical abstract, and each has its own format. This is how they compare, based on Elsevier's highlights and graphical abstract pages (November 2026):

HighlightsAbstractGraphical abstract
Form3 to 5 bullet points (3 to 4 for Cell Press)A paragraph or a structured summaryOne image
Length85 characters or fewer per bullet, spaces includedSet by each journalAt least 1328 x 531 pixels at 300 dpi
ContentNew results and any new methodsThe whole studyThe contents of the article in pictorial form
FileA separate Word documentPart of the manuscriptA separate file (TIFF, EPS, PDF or MS Office)

The abstract is still the full summary of your study. If you haven't written it yet, start with our guide on how to write a research abstract, because the highlights are easier to write once the abstract's findings are settled.

Elsevier highlights requirements

Elsevier's highlights page gives these rules for every set of Elsevier highlights, and a journal's Guide for Authors can add to them.

RequirementWhat Elsevier says
NumberThree to five bullet points; three to four for Cell Press articles
Length85 characters or fewer per bullet, including spaces
ContentThe novel results of the research and any new methods used
WordingNo jargon, acronyms or abbreviations; use keywords and write for a general audience
FileA Word document, uploaded with "Highlights" chosen from the drop-down list
TimingNot part of editorial consideration and not required until the final files stage

The wording rule has the biggest effect on what you write. In a bullet for a general audience, you spell out terms that your field abbreviates, and the full terms take more characters. You'll often have to choose between a spelled-out term and an extra detail, and the spelled-out term should win.

The timing rule tells you when the file is due. Elsevier says highlights are not part of editorial consideration, and it doesn't need the file until the final files stage. Once the article is published, readers will see the highlights first. So make sure they are as carefully crafted as the abstract. Check if your journal requests highlights and when. The details are in its Guide for Authors. A journal submission checklist helps you track all the files the submission system asks for.

Is there an Elsevier highlights word limit?

No. Elsevier sets a character limit and no word limit. Each bullet can have 85 characters or fewer, and spaces count as characters.

The nine example bullets on Elsevier's highlights page run from 66 to 83 characters and from 10 to 15 words each. That gives a working range of about 10 to 15 words per bullet. A bullet with long technical terms will reach 85 characters with fewer words than one written in short, everyday words.

The limit for the whole set follows from the bullet limit. Five bullets of 85 characters come to 425 characters at most, and four bullets at Cell Press come to 340. Most sets are shorter, because few bullets need all 85 characters.

If every bullet in your Elsevier highlights is close to the limit, each bullet probably has more than one finding. Split a long bullet into two short ones. The set can still stay within five bullets, and each short bullet is easier to scan.

How to count Elsevier highlights characters

Every character in a bullet counts toward the 85. That includes letters, the spaces between words, commas, hyphens, semicolons and every digit in a number. Numbers count digit by digit, so "2,500" uses five characters, and a unit such as "mg" adds two more plus the space before it.

Here is one draft bullet cut to the limit in two steps. The counts include spaces.

Prompt
Draft (130 characters):
Our results show that weekly low-stakes quizzes significantly improved final exam performance among first-year statistics students

Step 1, remove the lead-in (108 characters):
Weekly low-stakes quizzes significantly improved final exam performance among first-year statistics students

Step 2, use shorter nouns (85 characters):
Weekly low-stakes quizzes significantly improved exam scores in first-year statistics

The first step removes "Our results show that". Every bullet is a result, so the lead-in adds 22 characters and no information. The second step turns "final exam performance among first-year statistics students" into "exam scores in first-year statistics", which says the same thing in fewer characters.

The word "significantly" stays. In a quantitative paper it usually reports a statistical test, so removing it would change the claim. Cut padding first, and keep the words that carry the finding, such as hedges, qualifiers and the name of the outcome.

To check the count, paste each bullet into our free word counter, which shows characters with and without spaces. Read the figure with spaces, because that's the one Elsevier uses. For a wordy draft, the sentence shortener removes filler phrases and redundant pairs and lists every cut with its reason, while facts, numbers and hedges are preserved.

Check the count again after the proofread. A corrected spelling or an added article can push a bullet that sat at 84 or 85 characters over the limit, so the last check comes after the last edit.

Proofread your highlights before upload

Paste your highlights and abstract into the AI Proofreader and accept or reject each tracked change. Free accounts get 250 words a month.

Proofread your highlights

Highlight examples by field

Elsevier's highlights page gives two example sets. One comes from Cancer Cell (2017) and one from Learning and Instruction (2011). This is the Learning and Instruction set, which has five bullets:

Prompt
Fading of a script alone does not foster domain-general strategy knowledge
Performance of the strategy declines during the fading of a script
Monitoring by a peer keeps performance of the strategy up during script fading
Performance of a strategy after fading fosters domain-general strategy knowledge
Fading and monitoring by a peer combined foster domain-general strategy knowledge

Each bullet states one result in plain words. None of them describes the background of the study or repeats the title.

The sets below are written for imagined studies in five fields, to show the same pattern in different subjects. They contain no real results. Every bullet is under 85 characters, spaces included.

Engineering

Prompt
Recycled glass aggregate kept concrete strength within design limits
Finer glass particles reduced cracking in freeze-thaw testing
A small change to the mix offset strength loss at higher glass content

Public health

Prompt
Text message reminders raised vaccination uptake in rural clinics
The effect was largest among parents who had never visited the clinic
Reminders cost less per child than a single home outreach visit

Education

Prompt
Weekly low-stakes quizzes improved exam scores in first-year statistics
Students who skipped quizzes gained less from the same lectures
Quiz feedback within a day mattered more than the number of questions

Economics

Prompt
Small firms raised prices less than large firms after the energy shock
Price changes followed supplier contracts more closely than demand
Firms on fixed-price supplier contracts changed prices the least

Computer science

Prompt
A lightweight model detects crop disease from smartphone photos
The model runs offline on low-cost phones used by farm advisers
Labeled field photos from three regions are released with the paper

The computer science set has a method bullet and a data bullet. Elsevier asks for new methods when a study has them, and a released dataset is something other researchers can use. The public health set ends on cost, which is a finding a reader outside the field can act on.

All five sets follow the same pattern as the Learning and Instruction example. The subject of the study appears in the first bullet, each later bullet adds one finding, and no bullet explains why the topic matters. That order works for most Elsevier highlights: the main result first, then the results that qualify or extend it.

How to write highlights from your paper

Write your highlights after the abstract and the discussion are finished, so the findings are final. These six steps take a draft paper to a set that fits the rules.

  1. List every finding. Go through your results and discussion and write each finding as one plain sentence. Then keep the three to five that a reader in your field would remember. Elsevier wants the new results, so a finding that confirms earlier work only goes in if confirming it was the point of the study.
  2. Write one finding per bullet. Two findings joined with "and" rarely fit in 85 characters. Splitting them also makes each one easier to scan.
  3. Start with the result. "This study investigates the effect of weekly quizzes on student learning outcomes" uses 81 characters and reports no finding. Open with the finding itself and the subject of the study comes with it.
  4. Use the terms readers search for. Elsevier asks for keywords and no acronyms, so write the full name of a method or a condition. If the full term makes the bullet too long, rewrite the rest of the bullet around it.
  5. Add a method bullet only for a new method. Elsevier's wording is "new methods that were used during the study (if any)". A standard survey or a standard statistical test doesn't need its own bullet.
  6. Count and proofread. Check each bullet against the 85 characters, then read the set for grammar and spelling. A typo in the highlights is in the first text a reader sees.

The most common problems are easy to spot once you look for them. Background bullets ("Plastic pollution is a growing problem") use a line without reporting a result. Acronyms break Elsevier's wording rule. A bullet that drops a hedge from the paper ("may reduce" written as "reduces") claims more than your results show, so keep the same strength of claim as the discussion. A bullet that repeats the title gives the reader nothing new. A set where every bullet starts with "We" sounds like a list of tasks, so start each one with the finding.

From abstract to highlights: one worked set

Here are the results sentences of a short imagined abstract, followed by the highlights written from them.

Prompt
Abstract (results): Text message reminders sent two days before an appointment raised on-time vaccination in rural clinics. The increase was largest among parents who had never visited the clinic before. Per child, the reminders cost less than a single home outreach visit by a nurse.

Highlights:
Text message reminders raised vaccination uptake in rural clinics
The effect was largest among parents who had never visited the clinic
Reminders cost less per child than a single home outreach visit

Each abstract sentence became one bullet. The first bullet drops "sent two days before an appointment", because the timing belongs in the methods and the bullet only needs the finding. The second keeps the group that gained most, which is the detail a clinic manager would look for. The third keeps the comparison with outreach visits, because a cost finding means little without something to compare it with.

Your cover letter to the editor reports the same findings in full sentences. Our guide to the journal cover letter shows where they go.

If you write in English as a second language, run the finished set through the AI Proofreader with the abstract. The two should use the same terms for the same things, and a proofread of both together shows any mismatch.

Elsevier highlights in LaTeX

The elsarticle class, Elsevier's LaTeX class for journal submissions, has a highlights environment in its templates. The current version on CTAN is 3.5, dated January 9, 2026. In the template, the highlights block comes after the abstract and the graphical abstract and before the keywords:

Prompt
\begin{abstract}
Abstract text.
\end{abstract}

\begin{graphicalabstract}
%\includegraphics{grabs}
\end{graphicalabstract}

\begin{highlights}
\item Weekly low-stakes quizzes improved exam scores in first-year statistics
\item Students who skipped quizzes gained less from the same lectures
\item Quiz feedback within a day mattered more than the number of questions
\end{highlights}

\begin{keyword}
formative assessment \sep quizzes \sep statistics education
\end{keyword}

Each highlight is one \item line. The elsarticle documentation says the graphical abstract and the highlights appear as the first two pages of the PDF, before the article content begins.

Elsevier's highlights page asks for the highlights as a Word document at upload. Keep the same bullets in a separate .docx file as well, so the text in your PDF and the uploaded file match. If you copy the bullets from your .tex file into Word, remove any LaTeX commands such as \textit{} first. A percent sign also needs care. In LaTeX, % starts a comment, so "40%" is written 40\% inside \item and "40%" in the Word file. Count the characters of Elsevier highlights as readers see them, so 40\% counts as three characters. If your paper is in Overleaf, our guide to proofreading a LaTeX paper covers checking the text without breaking the markup.

Frequently asked questions

Q: What is the Elsevier highlights length limit?

Each bullet can be 85 characters or fewer, including spaces. A set has three to five bullets, or three to four for Cell Press articles. Elsevier's own example bullets run from 10 to 15 words, which is a useful guide when you draft.

Q: Are highlights mandatory for Elsevier journals?

It depends on the journal. Elsevier says highlights are not part of editorial consideration and are not required until the final files stage. Your journal's Guide for Authors says whether it asks for them and when to upload the file.

Q: Can highlights include abbreviations or acronyms?

No. Elsevier's guidance says highlights should have no jargon, acronyms or abbreviations, and should use keywords for a general audience. If a spelled-out term makes a bullet too long, rewrite the rest of the bullet and keep the full term. For example, write "magnetic resonance imaging" in full and cut a less important detail to make room.

Q: Should highlights repeat sentences from the abstract?

They report the same study in fewer words. Most abstract sentences are longer than 85 characters, and highlights list only the new results and any new methods. Take the findings from your abstract and rewrite each one as a short bullet that starts with the result. Write the abstract first, so both use the same terms for the same things.

Free Word Counter

Paste a highlight and see its characters with and without spaces, so you know it fits the 85-character limit before you upload the file.

Share onXLinkedInFacebook
Dana - Author at ProofreaderPro.ai
DanaContent Creator

Dana is a content creator at ProofreaderPro, where she runs the daily blog and writing operations. She writes the articles on how the online editing platform works, and she handles customer messages every day, with a five-star satisfaction score to show for it.

More Articles

Keep Reading

Try AI Proofreader Free

Join researchers from 200+ universities worldwide. Free to start, no credit card required.

Get Started Free
Proofreader Pro AI
Refine your research with ProofreaderPro.ai, the world's leading AI-powered proofreader, tailored for academic text.
ProofreaderProAI, Greenleaf Ave, Staten Island, 10310 New York
Ā© 2026 ProofreaderPro.ai. A leading academic proofreader, editor & humanizer. Made with ā¤ļø and linguistically sound syntax 🌳s